View EASR3212RGBA0_9033599.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 1 6 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com smd ? b EASR3212RGBA0 features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? muilt - color type. ? pb - free . ? the product itself will remain within rohs compliant version. ? compliance with eu reach ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). description ? the smd led is much smaller than lead frame type components, thus enable smaller board ize, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. ver.:3 release date:03/15/2017 B:approved(?l)
datasheet smd ? b EASR3212RGBA0 2 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com device selection guide chip chip type materials emitted color resin color r6 algainp brilliant red water clear gh ingan brilliant green bh ingan blue absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f r 6 25 g h 2 0 bh 2 0 ma peak forward current (duty 1/10 @1khz) i fp r 6 60 g h 100 bh 100 ma power dissipation pd r 6 60 g h 7 5 bh 7 5 mw operating temperature t opr - 40 ~ +85 storage temperature tstg - 40 ~ +90 electrostatic discharge esd hbm r 6 2000 g h 150 bh 150 v soldering temperature t sol reflow soldering : 260 for 1 0 sec. hand soldering : 350 for 3 sec. electro - optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv r 6 7 2 g h 140 bh 45 10 0 200 65 ----- ----- ----- mcd i f = 2 0 ma viewing angle 2 1/2 ----- 1 3 0 ----- deg i f = 2 0 ma peak wavelength p r 6 - ---- g h - ---- bh - ---- 63 2 5 18 468 - ---- ---- - - ---- nm i f = 2 0 ma dominant wavelength d r 6 ----- g h ----- bh - ---- 6 24 5 25 470 ----- ----- - ---- nm i f = 2 0 ma spectrum radiation bandwidth r6 ----- g h ----- bh ----- 20 35 25 ----- ----- ----- nm i f = 2 0 ma forward voltage v f r6 1.7 g h 2 .7 bh 2 .7 2.0 3.3 3.3 2.4 3.7 3.7 v i f = 2 0 ma reverse current i r r6 - ---- g h ---- - bh ----- ----- ----- ----- 10 5 0 50 a v r =5v note: tolerance of luminous intensity: 11% a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?*
datasheet smd ? b EASR3212RGBA0 3 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com typical electro - optical characteristics curves r 6 a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?*
datasheet smd ? b EASR3212RGBA0 4 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com typical electro - optical characteristics curves g h a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?*
datasheet smd ? b EASR3212RGBA0 5 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com typical electro - optical characteristics curves b h a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?*
datasheet smd ? b EASR3212RGBA0 6 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com package outline dimensions note: tolerances unless mentioned 0.1mm. unit = mm a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?*
datasheet smd ? b EASR3212RGBA0 7 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com moisture resistant packing materials label explanation ? cpn: customer s product number ? p/n: product number ? qty: packing quantity ? cat: luminous intensity rank ? hue: chromaticity coordinates & dom. wavelength rank ? ref: forward voltage rank ? lot no: lot number reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?*
datasheet smd ? b EASR3212RGBA0 8 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com carrier tape dimensions: loaded quantity 2 000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?* label desiccant label aluminum moisture-proof bag
datasheet smd ? b EASR3212RGBA0 9 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com precautions for use 1. over - current - proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package : t he leds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package : t he led's floor life is 1 year under 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following condition s. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during he ating. 3.4 after soldering, do not warp the circuit board. 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing re pair should not be done after the leds have been soldered. when repairing is unavoidable, a double - head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged b y repairing. a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?* pre-heating 150~200 c 60~120sec. above 217 c 60~150sec. 260 c max. 10sec. max. 6 c/sec.max. above255 c 30sec.max. 3 c/sec.max.
datasheet smd ? b EASR3212RGBA0 10 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com application restrictions high reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. if you have any concerns, please contact everlight americas before using this product in your application. this specification guarantees the quality and performance of the product as an individual component. do not use this product beyond the specification described in this document. a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?*
datasheet smd ? b EASR3212RGBA0 11 copyright ? 2010, everlight americas inc. all rights reserved. release date : 10 - dec - .20 16 . issue no: dse - 0012818 rev: 3 www.everlightamericas.com di sclaimer 1. everlight reserves the right(s) on the adjustment of product material mix for the specification. 2. the product meets everlight published specification for a period of twelve (12) months from date of shipment. 3. the graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibili ty for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. these specification sheets include materials protected under copyright of everli ght. reproduction in any form is prohibited without obtaining everlights prior consent. 6. this product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applic ations or any other application which can result in human injury or death. please contact authorized everlight sales agent for special application request. a wfs/;4!!!!!sfmfbtf!ebuf;1402603128!!!!!!bh0;bqqspwfe);.f$w?*

▲Up To Search▲

Price & Availability of EASR3212RGBA0

	To Download EASR3212RGBA0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .